Price your move now - Call 0755 1168 959


MovingHome Security Locks and Hinges

December 13, 2018by was73100

Having dealt with the doors on your home in article 3, next I would like to take a look at locks and hinges.

Many homes use the lock-in-knob, this offers you convenience but it does not offer security from break ins. The fact is that many lock-in-knob type locks can be opened using a simple credit card, your home is just not secure if you are using this type of lock.

Lock-in-knob type locks are fine for internal doors that you want to lock for privacy reasons, but all exterior doors need a deadbolt lock to give the level of security required. With this type of lock when you operate the key the mechanism slides a strong metal bolt from the door into the door’s frame.

These are the things you should make sure of when you buy a deadbolt lock:

The bolt extends at least 1″ into the front edge of the door frame.

The strike plate is attached through the trim to the door frame with screws at least 3″ long.

The lock has a rotation case hardened shroud that prevents it from being twisted off with a pair of pliers or other tools.

There are two common types of deadbolts:

Single Cylinder Deadbolts

They have a thumb turn on the interior side. They are easy to use and could speed up exit in the event of an emergency like a house fire. Remember if they are used near a window they can be opened by breaking the window and reaching through. This type of deadbolt lock will not prevent a burglar from using the door to remove your property.

Double Cylinder Deadbolts

Use keys on both sides of the lock. This type of lock is more suitable if there is glass window within 40″ of the lock, but they can present a potential fire escape hazard. This type of deadbolt lock can delay a burglar that wants to use the door to remove your property.

The final part of the locking mechanism is the strike plate; this is attached to the door frame with screws. The metal bolt of the deadbolt lock slides into the strike plate to secure the door to the door frame.

A high security strike plate is needed to keep the metal bolt from being forced from the door frame when locked. A high security strike plate should have at least 4 screws that are a minimum of 3 inches long.

Finally its time to consider the other edge of the door, there is no point in having a great deadlock fitted to a door with weak hinges. Many door hinges are often fitted with the same 3/4″ screws as used for common strike plates. Replace these with 2″ to 3″ fully threaded screws so the hinges are anchored to the door frame.

Make sure that the hinge pins are not exposed to the outside so a potential…


Source by Roger Overanout

Home Removals, Fine art Removals Office relocation

Leave a Reply

Your email address will not be published. Required fields are marked *

3B Removals

Your forth coming move, we understand and take the stress out of you move.
Part of the 3B Group Trust NGO < br> Latest discount offers for Trust Members Slough

Call TODAY or at anytime


and get a free estimate

Newsletter Sign Up

House Removals and Office Relocation in Reading, Slough, Guilford.