Hey guys…It’s been a while since I’ve posted a helpful tip to add to your arsenal of automotive interior repairs I’ve giving here on my blog.
So I thought of giving you a little bit on Stain Removal in Carpet. This is one thing I get a lot of questions for and that is how to get those nasty brown, or black, or even red stains out of the interior carpet of the vehicles I work on on a daily basis.
The trick isn’t to it isn’t really a trick at all, it’s timing and knowledge of what to use where and when. Getting to a spill before it gets a chance to soak in is your best defense against a stain in your carpet. If you spill something wipe it up and soak it up as quickly as possible and then flush with water and soak it up with a towel, or what ever you have at the time. But that’s not always the case and that’s where this little guide will help you, but really if you can wipe spills up a fast as you can and this helps to get the actual stain out later when you have more time.
One of the most common stains I see in vehicles are footprints or skid marks from dirty and greasy shoes. The answer to this is a de-greaser. There are so many different options to use in this situation, but I’m here to make this as simple as possible and effective. Supplies you will need are a couple of white towels, a scrub brush and a mild detergent, like dawn dish soap, a small pail of warm water mixing the soap to 1/4 oz. soap to gallon of water. Dip your brush in the soap and water, scrub the areas lightly with the brush making sure not to soak the carpet then wipe and blot with the towel. Repeat if necessary, wiping and blotting the area with the towel to remove the dirt and grime and the water, you don’t want it to sour later if left wet. If your have a shop vac, use it to suck up the water and to fluff the carpet pile back up to dry better. Place a fan in the vehicle if needed to dry further if you’ve had a bad one.
Now sometimes more then not you will need something a little stronger to get the grease out. I use Castrol Super Clean, the purple stuff. I’ve used Simple Green at times too, and some of the products at some of detail shops I’m at from time to time, so really any good de-greaser will work. Just spray the area with the cleaner, scrub with the brush, then wipe it up with a towel. Now if at all possible flush the area with water, this will help to remove the chemicals from the carpet and will help to preserve the natural look to the carpet. Some of those chemicals are pretty strong and if left can damage the carpet.
Soda pop and…